Edit
Firmware
This window shows server blade firmware and LPAR manager firmware
versions. You can update them on this window. Multiple server blade
firmware versions can be updated at a time.
See Hitachi Compute Blade 500 Series Management Module Setup Guide for
details.
Server blade tab
2-170
Item
The setting for the "Switch and management module's IP
address", which is set by the HA monitor environment setup
(monsetup) command, must be "auto".
Disable: Does not perform a system failover in the N+M cold
standby configuration.
Table 2-198 Action button at the bottom
Item
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Edits the HA monitor settings.