Hitachi Compute Blade 500 Series Web Console Users Manual page 27

Table 2-11 Action combo box items on the upper right
Item
Shutdown
Chassis Maintenance
mode ON
Chassis Maintenance
mode OFF
Front panel
Maintenance mode
ON
Front panel
Maintenance mode
OFF
Import System
Settings
Edit silent mode
settings
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Shuts down the system unit. Make sure to turn off all server
blades before shutdown. To restart the system after shutdown,
unplug and plug the power cable to supply power.
Sets the server chassis in maintenance mode. Server chassis
maintenance mode applies for fan modules and power supply
modules, not for server blades, switch modules, management
modules, and front panel. This mode will be automatically
cancelled in about two hours after it is set.
Sets the server chassis to release from maintenance mode.
Server chassis maintenance mode applies for fan modules and
power supply modules. Server blades, switch modules,
management modules, and front panel are not released from its
maintenance mode.
Sets the front panel in maintenance mode. This mode will be
automatically cancelled in about two hours after it is set.
Sets the front panel to release from maintenance mode.
Imports system settings. See Hitachi Compute Blade 500 Series
Management Module Setup Guide for details.
Sets the chassis silent mode settings. Need to install the module
that supports the silent mode to enable silent mode.
Description
2-17