Hitachi Compute Blade 500 Series Web Console Users Manual page 134

Switch module N summary
Maintenance mode
ON
Maintenance mode
OFF
Authentication
settings
Clear
authentication
settings
2-124
Table 2-139 Action combo box items on the upper right
Item
Sets the slot of the switch module currently shown in maintenance
mode. If the slot has a switch module, the switch module is also set
in maintenance mode. The mode will be automatically cancelled in
about two hours after the mode is set.
Release the slot of the switch module currently shown from
maintenance mode. If the slot has a switch module, the switch
module is also released from maintenance mode.
Sets the switch module authentication information that is displayed.
If the authentication is failed while changing the IP address of
switch module, authentication settings are needed.
Clears the switch module authentication information that is
displayed. Uses the default account (operator, no password) to
authenticate after clearing the switch module authentication
information.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description