Hitachi Compute Blade 500 Series Web Console Users Manual page 23

Chassis status (upper panel)
Operating status is provided by the type of onboard modules. The following
table shows operation states shown in the panel. When some modules fails,
check the system event logs to find details. If a device is connected to the
USB port on the front panel, the device name is shown.
Icon
None: Normal
Table 2-8 Chassis status (Summary table)
Icon
Normal
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-7 Chassis status (Figure)
A module installed in the location is running properly.
A module installed in the location is in a warning state.
Check the warning in the event list.
A module installed in the location is in a failure state.
Check the failure in the event list.
A module installed in the location is in initialization and
the type has yet to be recognized.
A module installed in the location is set in maintenance
mode.
A module is running properly.
Operating the Web Console
Description
Description
2-13