Hitachi Compute Blade 500 Series Web Console Users Manual page 102

Tip: See "USB/KVM" in Chapter 1, Hitachi Compute Blade 500 Series
Logical partitioning manager User's Guide for USB assignment and status
transition.
• LP Settings
LP Settings dialog box is shown by clicking Show LP Settings button in the
Settings tab or LP Settings button in the LPAR tab.
Server Blade
Condition
2-92
Item
Remove LPAR
Shut down LP
Reboot LP
Save settings
Collect LP dump log Only for management module firmware version A0145
Table 2-98 Items in LP Settings dialog box
Item
Server Blade
1 status
LP
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Removes an LPAR.
Stops LPAR manager.
Reboots LPAR manager.
Saves LPAR manager configuration information.
or later, LP dump in operation is collected and
downloaded.
Power Shows the power status of the
server blade.
Condition Shows the LPAR manager running
status only with the server blade
powered on.
Description