Hitachi Compute Blade 500 Series Web Console Users Manual page 158

Item
IP address
Subnet mask
Note:
• Changing the internal network restarts the management module.
• Do not change the internal network when the server blade is in operation.
If you do, some failure events, occurred when the server blade is being
restarted, may not be detected.
Tip: If not using network IP addresses specified as
192.168.253.0/255.255.255.0 outside the system unit, you need not change
the internal network settings.
Item
Edit
Link fault tolerance
Fault tolerance in the management LAN interface can be set on this window.
You can enable or disable the link fault tolerance and set the monitoring time.
2-148
Table 2-168 Internal LAN items
Shows the network used internally for the system unit. The subnet mask
is fixed: 255.255.255.0, which cannot be changed.
Table 2-169 Action button at the bottom
Edits the internal LAN settings.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description