Hitachi Compute Blade 500 Series Web Console Users Manual page 179

Item
Server Blade
HA Monitor
Port
System name
N+M Cold standby
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-197 HA monitor items
Shows the server blade number.
Shows whether to use the HA monitor on this server blade.
Enable: Enables the use of the HA monitor.
Settings for port, system name, and N+M cold standby can be
specified.
Disable: Disables the use of the HA monitor.
Settings for port, system name, and N+M cold standby cannot
be specified.
Shows the port number.
Set the port number in the range from 5001 to 65535 for
each system failover configuration.
Set the same value as the "Switch and management module's
port number", which is set by the HA monitor environment
setup (monsetup) command.
Shows the system name of the HA monitor used in the
system failover configuration.
Set the same name as the "System's partition name", which
is set by the HA monitor environment setup (monsetup)
command.
Shows whether to link with N+M cold standby to use the HA
monitor.
Enable: Performs a system failover in the N+M cold standby
configuration.
Description
2-169