Hitachi Compute Blade 500 Series Web Console Users Manual page 221

Item
Send SNMP trap
Item
SNMP agent Shows enabling or disabling SNMP agent: Enable or Disable.
Specifies whether or not to use SNMP function.
System Shows the system contact name: Consists of up to 60 alphanumeric
contact name characters.
System Shows the system location consisting of up to 60 alphanumeric
location characters.
Port number Shows the port number used in SNMP from 1 to 65535. Default value:
161.
Trap level Shows the type of a trap to report.
All: Reports all traps; fault, warning, and information.
Alert: Reports failure-level and warning level traps.
Information: Reports information-level traps.
Disable: Reports no trap.
SNMP version Shows SNMP versions available for the agent: v1/v2c or v1/v2c/v3.
Engine ID [Effective only with SNMP version v1/v2c/v3]
string
Shows a character string for the engine ID used by the agent. Up to 27
alphanumeric characters.
Engine ID [Effective only with SNMP version v1/v2c/v3]
Shows an Engine ID used by the agent. This item is automatically
created from a character string for creating the Engine ID.
Table 2-265 Action button at the bottom
Item
Edit Edits SNMP agent settings.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-263 Action item
Sends SNMP traps for a test to check settings.
Table 2-264 SNMP Agent items
Description
Description
Description
2-211