Hitachi Compute Blade 500 Series Web Console Users Manual page 145

Item
Remaining
time [min]
LID
Hot standby status
Firmware version
Dictionary version
Equipment parameter version
Table 2-151 Action buttons at the bottom
Item
LID ON Turns on the LID (Identification LED) of the management module currently
shown.
LID OFF Turns off the LID (Identification LED) of the management module currently
shown.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Shows time left until the maintenance mode is
automatically cancelled when the management module
is in maintenance mode.
Shows an LID (Identification LED) state.
ON: Powered on.
OFF: Powered off.
-----: No management module is installed.
Shows the management module is active or standby.
Active: Management module is active.
Standby: Management module is standby.
-----: No management module is installed.
Shows the management module firmware version.
Shows the version of a dictionary installed.
Shows the version of an equipment parameter
installed.
Description
2-135