Hitachi Compute Blade 500 Series Web Console Users Manual page 207

Item
LDAP server LDAP
settings
LDAP
server 1
LDAP
server 2
LDAP
server 3
Port
number
Bind DN
Directory Base DN
search
Login ID
attribute
Role
attribute
Group Member
authentication attribute
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-240 LDAP items
Enables or disables LDAP features: Enable or Disable.
Default value: Disable
With Enable, authentication is executed following research
for LDAP directories on an LPAP server at user
authentication.
A host name for an LDAP server: Either host name or IP
address can be used.
Method: FQDN or IPv4
Up to 127 characters can be used; a space or spaces
cannot be used at the beginning and the end.
Characters available for FQDN: alphanumeric characters:
0-9, A-Z, a-z. "-", ".".
Used for connecting to an LDAP server.
Value: from 1 to 65535
Only when you need to change the default value, 636,
change the number.
Method for connecting to an LDAP server at user
authentication.
Value: from 1 to 256 ASCII characters
Specifies DN for the root directory to the target LDAP
directory. All under the root directory specified here will be
searched at user authentication.
Value: from 1 to 256 ASCII characters
A space or spaces cannot be used at the beginning and the
end.
Value: from 1 to 64 ASCII characters
Specifies which attributes in each entry on the LDAP
directory to compare with the user ID specified at user
authentication. For Active Directory, "sAMAccountName", a
common attribute name, is used at login ID search.
A space or spaces cannot be used at the beginning and the
end. Start with an alphabet: A-Z; a-z followed by
alphanumeric characters: 0-9, A-Z, a-z.
Value: from 1 to 64 ASCII characters
Specifies an attribute used when roles are given to the user
account, if any. If no role is given, ignore this setting.
A space or spaces cannot be used at the beginning and the
end. Start with an alphabet: A-Z; a-z followed by
alphanumeric characters: 0-9, A-Z, a-z.
Value: from 1 to 64 ASCII characters
Specifies an attribute for containing accounts allowed to log
in. For Active Directory, "member", a common attribute
name, is used for the user account list.
Description
2-197