Hitachi Compute Blade 500 Series Web Console Users Manual page 132

Switch modules summary
Item
Maintenance
mode ON
Maintenance
mode OFF
Switch modules information
Item
Switch
Module
Power
2-122
Table 2-136 Action combo box items on the upper right
Sets a switch module slot in maintenance mode. Maintenance mode is
set for a switch module slot. If the slot has a switch module, the
switch module is also set in maintenance mode. The mode will be
automatically cancelled in about two hours after the mode is set.
Release the slot of a switch module from maintenance mode. Release
of maintenance mode is done for a switch module slot. If the slot has
a switch module, the switch module is also released from maintenance
mode.
Table 2-137 Switch modules information items
Shows the number of a switch module.
Shows a power supply state on the Web console among the following states:
ON: Powered on
OFF: Powered off.
-----: No switch module is installed.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description