Hitachi Compute Blade 500 Series Web Console Users Manual page 68

Restarting BMC on all server blades can change the server blade sub power
OFF to ON. When a non-primary server blade is selected, BMC starts up only
on the server blade. You cannot change the sub power OFF to ON from non-
primary server blades.
Note:
• When you need to update the integrated firmware to a version before
SMASH supported, put back the port numbers for SMASH (WS-
Management) and SMASH (CLP) to the default before the updating. For
details, see Hitachi Compute Blade Series SMASH and IPMI User's Guide.
• When you turn on or off the server blade using ServerConductor/Blade
Server Manager, make sure to register the server chassis in the managed
targets of ServerConductor/Blade Server Manager before changing the
settings for IPMI over LAN or IPMI/SMASH User account 1.
Note: Limit the source IPv6 address in Network setting items are supported
by the following firmware versions.
Server blade firmware
- For Xeon server blade 520H A1/B1 : Not supported
- For Xeon server blade 520A A1: Not supported
- For Xeon server blade 520H B2: Not supported
- For Xeon server blade 540A A1: Not supported
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
Note: The password aging function of the BMC user account setting items are
supported by the following firmware versions.
Server blade firmware
- For Xeon server blade 520X or later: integrated FW version 06-23,
07-15 or later
- For Xeon server blade 520H B3 or later: integrated FW version 08-16 or
later
Note: IPMI/SMASH user accounts items, SMASH (WS-Management) items,
SMASH (CLP) items and Asset information items are supported by the
following version or later.
Server blade firmware
- For Xeon server blade 520H A1/B1: integrated FW version 01-55 or
later
- For Xeon server blade 520A A1: integrated FW version 02-25 or later
- For Xeon server blade 520A A1: integrated FW version 02-25 or later
- For Xeon server blade 520H B2: integrated FW version 04-08 or later
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 06-01 or
later
2-58
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide