Hitachi Compute Blade 500 Series Web Console Users Manual page 101

Item
Name Shows LPAR name.
Click an LPAR Name to show the LPAR information dialog box.
Status Shows LPAR status.
An LPAR status is any of the following status.
ACT (Activate): Powered on.
DEACT (Deactivate): Powered off.
FAILURE (Failure): Not available due to an unrecoverable failure.
Processor Shows the number of logical processors assigned to the LPAR and a
scheduling mode set for an LPAR in the brackets.
Memory Shows the memory size assigned to the LPAR.
NIC Shows the number of NIC ports assigned to the LPAR.
HBA Shows the number of HBA ports assigned to the LPAR.
USB Shows the status of USB device assignment.
(USB/KVM) -----: Not assigned
A: Assigned
R: Running (available)
[Management module firmware version A0205 or later]
When multiple USB devices can be used, a device used for remote
console connection is shown as USB/KVM.
USB (Front) [Management module firmware version A0205 or later]
Shown when multiple USB devices can be used.
Shows the number of USB device ports assigned to the LPAR (not
including devices used for remote console connection).
Table 2-97 Action button at the bottom
Item
Add LPAR
Start remote console
Activate
Action Attach USB/KVM
Detach USB/KVM
Edit USB Assign
Scheduling mode
Deactivate
Reactivate
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Shows Add LPAR dialog box.
Open the remote console.
Activates an LPAR: A confirmation dialog is shown.
Attaches Remote Console.
Detaches Remote Console.
[Management module firmware version A0205 or later]
Shows USB port setting dialog to edit USB device
assignment.
[Management module firmware version A0240 or later]
Scheduling mode settings.
Deactivate an LPAR.
Reactivates an LPAR.
2-91