Hitachi Compute Blade 500 Series Web Console Users Manual page 41

Table 2-28 Action buttons at the bottom
Item
Backup Back up LPAR manager settings (LPAR manager configuration information).
The dialog specifying the folder/directory to which a backup file is stored is
shown.
Cancel Close Backup LP Settings dialog.
Tip: For management module firmware version A0145 or later, the
following is the backup file name format.
hvm-pX-VVRR-YYYYMMDDhhmmss.backup
"X" indicates a partition number: server blade number; VVRR indicates
the LP version currently assigned.
Note: In SMP configuration, select the primary server blade when backing
up LP settings.
• Restore LP Settings
Table 2-29 Items in Restore LP Settings dialog
Item
Server Blade No.
Assigned LP
firmware
Setting File
Browse
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Server Blade No. is shown.
Current The bank and LPAR manager firmware version assigned
to a server blade now are shown.
Next The bank and LPAR manager firmware version assigned
to a server blade, in the case that the server blade boots
next time, are shown.
The backup file used to restore LPAR manager settings
(LPAR manager configuration information) is shown.
Select the backup file used to restore LPAR manager
settings (LPAR manager configuration information).
Operating the Web Console
Description
2-31