Hitachi Compute Blade 500 Series Web Console Users Manual page 218

Item
Edit
HTTP tab
Service status
Port number
IPv4 Access control
Connectable
network
IPv6 Access control
2-208
Table 2-258 Action button at the bottom
Edits SSH/SFTP service settings.
Table 2-259 HTTP items
Item
IP address If access control is set to Allowed (With restrictions),
Net mask
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Shows Enable or Disable connection to the
management module via HTTP.
Shows a port number for connection to the
management module via HTTP.
Displays IPv4 access control settings for connections
to the management module via HTTP. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.
this item displays information (network address and
subnet mask) about the network from which
connections are allowed.
Displays IPv6 access control settings for connections
to the management module via HTTP. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.