BMC tab
Item
Time adjustment method
Time zone
Daylight
Use
saving time
Start date
Start
condition
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-43 BMC time items
Select one of the two shown below:
•
Manually or by IPMI command.
Set time manually or using the Set SEL Time
command. Time is not automatically set. When using
SC/Agent, set time this way.
•
Using NTP servers
Synchronize time with the management module using
NTP.
Type BMC time zone from – 12:00 to + 14:00.
Select a BMC daylight saving time: Enable or Disable.
Type a month and day in MM-DD format, using numbers 0
to 9 for each M and D. 00-00 and a date valid on the
calendar.
Select and set the following:
•
Start date
•
The first Start day of the week after Start date
•
The last Start day of the week before Start date
•
The last Start day of the week
Operating the Web Console
Description
2-45