Hitachi Compute Blade 500 Series Web Console Users Manual page 215

Telnet tab
Item
Service status
IPv4 Access control
Connectable
network
IPv6 Access control
Connectable
network
Table 2-254 Action button at the bottom
Item
Edit Edits Telnet service settings.
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-253 Telnet items
Shows Enable or Disable connection to the
management module via Telnet.
Displays IPv4 access control settings for connections
to the management module via Telnet. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.
IP address If access control is set to Allowed (With restrictions),
this item displays information (network address and
Net mask
subnet mask) about the network from which
connections are allowed.
Displays IPv6 access control settings for connections
to the management module via Telnet. The following
settings are available: Allowed (No restrictions),
Allowed (With restrictions), and Prohibited.
IP address If access control is set to Allowed (With restrictions),
this item displays information (network address and
Net mask
prefix length) about the network from which
connections are allowed.
Operating the Web Console
Description
Description
2-205