Hitachi Compute Blade 500 Series Web Console Users Manual page 113

Item
Subnet Mask text box
Default Gateway text box
VNIC system No. text box
LP ID text box
Time Zone spin box
Advanced CLI 1 – 8 text
box
1
Option
Note:
1 The items which are not explained above are shown. The items are hidden when
.
the items are not set.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
In addition, do not set the IP address set for
management module or BMC for LP IP address. If
the IP address for management module is set for
LP IP address, web console would not start. In
addition, if the IP address for BMC is set for LP IP
address, remote console would not start.
Sets the subnet mask.
Sets the default gateway.
Set IP addresses and default gateways for LPAR
manager and the management module in the
same network. If they are set in different
networks, LPAR manager may fail to start up or a
communication error may occur after the startup.
When not using Default Gateway, set as 0.0.0.0. If
the field is blank, LPAR manager may fail to start
up.
Sets VNC system No., which is used for creating a
MAC address to prevent the same MAC address
from being used for shared NIC and virtual NIC.
Specify a unique number, among all LPAR
manager systems including Compute Blade Series.
[Management module firmware version A0135 or
earlier]
Set a value from 1 to 128.
[Management module firmware version A0145 or
later]
Set 1 or larger. The maximum value depends on
the LPAR manager firmware version.
[LPAR manager firmware is not assigned to the
server blade]
Set a value from 1 to 128.
Defining the ID for LPAR manager authentication.
Set with 16 characters or less. The available
characters are alphanumeric, ~, @, $, #, %, ^, -,
+, =, _, ., [, and ].
As a default, a value which figures omitting "."
from LP IP address follow "LP_" is set.
Sets your time zone.
Sets LP CLI address 1 to 8.
2-103