Hitachi Compute Blade 500 Series Web Console Users Manual page 44

Condition tab
Power
Recovery wait [min]
Power On suppression
Status
2-34
Table 2-35 Condition tab items
Item
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Shows a power state among the following on the Web
console.
ON: Powered on including in Smart Configure state.
Powering ON: Being powered on.
OFF: Powered off including in sleep state.
Powering OFF: Being Powered off
Shows the remaining time before a server blade to be
powered on after the server chassis powered on if the
wait time after the power recovery is defined.
To release the server blade from powering on by the
setting, power off the server blade.
Enabled:
Shows the server blade is prevented from powering on.
This state temporarily occurs in active server blade and
standby server blade when N+M cold standby is
switching server blades.
Disabled:
Shows the power can be turned on.
Shows the server blade operation state.
Normal: Server blades in a normal state.
Warning: Server blades in a warning state. Check the
contents in the event list.