Hitachi Compute Blade 500 Series Web Console Users Manual page 93

Item
LP CLI address
Table 2-84 Action button at the bottom
Item
Confirm
Cancel
Virtual COM Console Settings
You can specify the settings only if the server blade is powered on.
Table 2-85 Items in the Edit virtual COM console settings dialog box
Item
Connection mode Select either Telnet or SSH for virtual COM connection mode.
Telnet Enable or disable user authentication for a Telnet connection.
authentication
Enable: User authentication is required when connecting via a
Telnet connection.
Disable: User authentication is not required when connecting via a
Telnet connection.
Note that user authentication is required when connecting by
using SSH.
Virtual COM console Specify the TCP port to be connected to a virtual COM console via
port Telnet or SSH.
Table 2-86 Action button at the bottom
Item
Confirm Shows the Confirming dialog box.
Hitachi Compute Blade 500 Series Web Console User's Guide
Enable: User authentication is required when connecting by
using the HvmSh command.
Disable: User authentication is not required when
connecting by using the HvmSh command.
Sets LP CLI address 1 to 8.
Shows the Confirming dialog box.
Cancels the setting and returns to the LP Setting dialog
box.
Description
Operating the Web Console
Description
Description
Description
2-83