Hitachi Compute Blade 500 Series Web Console Users Manual page 24

Warning
Failure
Power summary (lower left panel)
Power summary shows values for input power and power consumption.
Input power (AC)
Power consumption
(DC)
System event log (lower right panel)
System event logs are listed in this panel. The number of unchecked failures
is shown under the panel title bar.
This panel shows the latest 100 logs. To view all system event logs in the
system unit, click Show SELs. To download logs from the management
module, click Dumplog.
Item
Check
2-14
Icon
Table 2-9 Power summary items
Item
Present input power
Accurate power control
value (APC AC)
(Present)
Present power
consumption
Accurate power control
value (APC)
(Present)
Emergency power
control value (EPC)
Power rating of chassis
Table 2-10 System events
Shows whether the event is checked or not.
[Blank]: This event has been checked. Checked events are not included in
the number of the summary.
[!]: This event is not checked. Unchecked events are included in the
number of the summary.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
One or more modules is/are in a waning state. Check
the contents in the event list.
One or more modules is/are in a failure state. Check the
contents in the event list.
Shows power (AC) currently input to the
system unit.
Shows the power capping value
converted to AC power.
Nothing is shown if DCMI mode enabled.
Shows the total power consumed by
modules onboard.
Shows the APC (accurate power control)
power capping value in operation.
Nothing is shown if DCMI mode enabled.
Shows the EPC (emergency power
control) power capping value for
protecting the equipment.
Shows the total rated values of modules
onboard.
Description
Description