Hitachi Compute Blade 500 Series Web Console Users Manual page 121

Item
Note:
1 Shows NIC ports on the server blade.
.
Table 2-121 Action button at the bottom
Item
Assign all [Management module firmware version A0125 or later]
Checks all NIC ports that are not checked for assigned settings. Sets the
unchecked Virtual NIC Number in ascending order.
(Already checked NIC ports settings are not changed)
Clear all Releases settings.
Default Returns the Virtual NIC Number assignment to their default values.
OK Save NIC settings and closes the Set NIC port dialog box.
Cancel Cancels settings and returns to the Modify LPAR dialog box.
• Set USB port
[Management module firmware version A0205 or later]
Item
Port Assignment
1
panel
Hitachi Compute Blade 500 Series Web Console User's Guide
Segment Shows a segment assigned to a NIC port.
Virtual NIC Selects a Virtual NIC Number
Number radio
button
Description
Table 2-122 Items in Set USB port
Assign Selects an USB port to assign to the LPAR.
check box
Slot Shows USB ports on the server blade.
When multiple USB devices are available, the
following items are shown.
USB/KVM: Port to connect to the remote console
Operating the Web Console
Description
Description
2-111