Keithley 6220 Reference Manual page 356

14-14 SCPI Reference Tables
Table 14-8
System command summary
Command
:SYSTem
:COMMunicate
:SELect <name>
:GPIB
:ADDRess <NRf>
:ADDRess?
:SERial
:CONTrol
:RTS <name>
:RTS?
:PACE <name>
:PACE?
:TERMinator <name>
:TERMinator?
:BAUD <n>
:BAUD?
:SEND <data>
:ENTer?
:LOCal
:REMote
:RWLock <b>
:RWLock?
:ETHernet
:ADDRess <string>
:ADDRess?
:MASK <string>
:MASK?
:GATeway <string>
:GATeway?
:DHCP <b>
:DHCP?
:SAVE
:KEY <n>
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Communication interfaces:
Select interface: SERial, GPIB or ETHernet.
GPIB interface:
Set primary address: 0 to 30.
Query primary address.
RS-232 interface:
Handshaking:
Select handshaking: IBFull, RFR, or OFF.
Query handshaking.
Set flow control: XON or OFF
Query flow control.
Set output terminator: CR, LF, CRLF, or
LFCR.
Query output terminator.
Set baud rate: 300, 600, 1200, 2400, 4800,
9600, 19.2k, 38.4k, 57.6k, or 115.2k.
Query baud rate.
Send data via RS-232.
Reads data from serial port.
RS-232 only – Take 622x out of remote.
RS-232 only – Put 622x in remote.
RS-232 only – Enable or disable local lockout.
RS-232 only – Query state of local lockout.
Ethernet interface (6221 only):
Set IP address: "n.n.n.n".
Query IP address.
Set subnet mask: "n.n.n.n".
Query subnet mask.
Set Ethernet gateway: "n.n.n.n".
Query Ethernet gateway.
Enable or disable DHCP.
Query state (on or off) of DHCP.
Saves Ethernet setting changes.
Simulate key press.
See "SYSTem key-press codes," on page
Return to Section 14 topics
Model 6220/6221 Reference Manual
Default Sec SCPI
5
10
13
13-9.