Keithley 6220 Reference Manual page 33

Model 6220/6221 Reference Manual
1 Special keys and power switch:
EDIT/LOCAL Dual function – While in local, EDIT selects the source editing mode.
CONFIG
POWER
2 Function and operation keys:
Top Row
FILT
PRES
DC
SWP
COND
DELTA
6220:
6221:
PULSE
WAVE
Middle Row
COMM
ADDR
DISP
TRIG
UNITS
RECALL
6220:
6221:
AMPL
FREQ
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
While in remote, LOCAL cancel the remote mode.
Use to configure a function or operation.
Power switch – In position turns 622x on (I), out position turns it off (O).
Enables/disables analog filter.
Enables/disables the pre-set source value. Press CONFIG > PRES to set
the source value for PRES.
Selects DC current source function.
Arms the sweep function. Press CONFIG > SWP to configure the sweep.
Arms Differential Conductance. Press CONFIG > COND to configure
Differential Conductance.
Arms Delta. Press CONFIG > DELTA to configure Delta.
Increments value.
Decrements value.
Arms Pulse Delta. Press CONFIG > PULSE to configure Pulse Delta.
Arms Wave mode. Press CONFIG > WAVE to configure Wave.
Configures communications: GPIB, RS-232, or Ethernet (6221). Can also
press CONFIG > COMM to configure communications.
Sets GPIB address.
Turns off display. Press LOCAL or DISP to turn display back on.
Starts a sweep, delta, or wave (6221) test, or causes a manual trigger
event. Press CONFIG > TRIG to configure triggers.
Use to select measurement units for a delta function. Can also press
CONFIG > UNITS to select measurement units.
Displays buffer readings and statistics. Press CONFIG > RECALL to
access menu to clear the buffer.
Moves cursor (blinking digit or menu item) to the left.
Moves cursor (blinking digit or menu item) to the right.
Sets the amplitude for the wave function. Can also press CONFIG >
AMPL to set the amplitude. When in a menu, use this key to move the
cursor to the left.
Sets the frequency for the wave function. Can also press CONFIG >
FREQ to set the frequency.When in a menu, use this key to move the
cursor to the right.
Return to Section 1 topics
Getting Started 1-9