Keithley 6220 Reference Manual page 347

Model 6220/6221 Reference Manual
Table 14-2
Display command summary
Command
DISPlay
:ENABle <b>
:ENABle?
[:WINDow[1]]
:TEXT
[:DATA] <a>
[:DATA]?
:STATe <b>
:STATe?
:ATTRibutes?
:WINDow2
:TEXT
[:DATA] <a>
[:DATA]?
:STATe <b>
:STATe?
:ATTRibutes?
Note: *RST and SYSTem:PRESet have no effect on the display circuitry, a text message, or the state of the mes-
sage modes. Pressing LOCAL or cycling power enables (ON) the display circuitry, cancels all text mes-
sages and disables (OFF) the message modes. Pressing the DISP key will also enable the display.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Display control commands:
Enables or disables front panel display and controls. (Note)
Queries state (on or off) of the display and controls.
Top line display characters:
Text message:
Define ASCII message "a" (up to 20 characters). (Note)
Read text message
Enable or disable text message.
Query state (on or off) of text message.
Query attributes of message characters:
Blinking (1) or not blinking (0)
Bottom line display characters:
Text message:
Define ASCII message "a" (up to 32 characters). (Note)
Read text message
Enable or disable text message.
Query state (on or off) of text message.
Query attributes of message characters:
Blinking (1) or not blinking (0)
Return to
SCPI Reference Tables 14-5
Section 14 topics
Default Sec SCPI
13
√
√
√
√
√
√
√
(Note)
√
√
√
√
√
√
(Note)
√