Figure 1-3 Menu Editing Keys - Keithley 6220 Reference Manual

Model 6220/6221 Reference Manual
Figure 1-3
Menu editing keys
6220 Editing Keys:
Cursor Keys
Value Adjust Keys
Numeric Entry Keys
0 1 2 3 4 5 6 7 8 9 +/– 0000
ENTER / EXIT Keys
EXIT ENTER
Model 6220 menu navigation
After entering a menu structure, use the editing keys as follows:
Selecting menu items
1.
2.
3.
Setting a value
There are two ways to adjust a value: value adjust or numeric entry. Both methods
use the following editing techniques:
•
•
Value adjust method:
1.
2.
3.
4.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
6221 Editing Keys:
Rotary Knob & Cursor Keys
Use the Cursor Keys to place the blinking cursor on a menu item to be
opened or selected.
Press the ENTER key to select an item or open a sub-menu.
Use the EXIT key to cancel a change or back out of the menu structure.
To set a value to zero, press the 0000 numeric entry key.
To toggle the polarity of a value, press the +/– numeric entry key.
Use the Cursor Keys to place the blinking cursor on the digit to be edited.
Use the Value Adjust Keys to increment or decrement the value of the digit.
Digit(s) to the left may also change as the edited value is changed past "9"
or under "0".
Repeat steps 1 and 2 as needed to set the desired value.
Press ENTER to select the value. Pressing EXIT will cancel the change.
Return to
Cursor Keys
AMPL FREQ
Section 1 topics
Getting Started 1-21
Value Adjust Keys
Numeric Entry Keys
0 1 2 3 4 5 6 7 8 9 +/– 0000
ENTER / EXIT Keys
EXIT ENTER