Figure 10-2 Multi-Unit Connections - Keithley 6220 Reference Manual

10-20 Remote Operations
Figure 10-2
Figure 10-2
Multi-unit connections
To avoid possible mechanical damage, stack no more than three connectors on
any one unit.
To connect the Model 622x to the IEEE-488 bus, follow these steps:
1.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
shows a typical connecting scheme for a multi-unit test system.
NOTE To minimize interference caused by electromag-
netic radiation, use only shielded IEEE-488 ca-
bles. Available shielded cables from Keithley are
Models 7006, 7007, and 7708.
Line up the cable connector with the connector located on the rear panel.
The connector is designed so it will fit only one way.
location of the IEEE-488 connector.
Return to
Model 6220/6221 Reference Manual
Section 10 topics
Figure 10-3 shows the