Primary Address - Keithley 6220 Reference Manual

Ac and dc current source measure unit
Table of Contents

Advertisement

Model 6220/6221 Reference Manual
Figure 10-3
IEEE-488, Ethernet (6221 only), and RS-232 connector locations
2.
3.
4.

Primary address

The Model 622x ships from the factory with a GPIB address of 12. When the
instrument powers up, it momentarily displays the primary address. You can set
the address to a value of 0-30. Do not assign the same address to another device
or to a controller that is on the same GPIB bus.
Usually controller addresses are 0 or 21 but see the controller's instruction manual
for details. Make sure the address of the controller is the same as that specified in
the controller's programming language. To make sure the unit's interface is prop-
erly selected and configured or to check or change the setting, see
selection and configuration," on page
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
HI
INTERNALLY
SWITCHED
!
1 AMP MAX.
MADE IN
U.S.A.
CABLE
105Vpk
GUARD
105Vpk
LO
250Vpk
OUTPUT
CAT I
IEEE-488
ETHERNET
(CHANGE IEEE ADDRESS
WITH FRONT PANEL MENU)
10/100 BaseT
10bT
100bT
Tighten the screws securely, making sure not to over-tighten them.
Connect any additional connectors from other instruments as required for
your application.
Make sure the other end of the cable is properly connected to the controller.
Most controllers are equipped with an IEEE-488 style connector, but a few
may require a different type of connecting cable. See your controller's instruc-
tion manual for information about properly connecting to the IEEE-488 bus.
NOTE
You can only have 15 devices connected to an
IEEE-488 bus, including the controller. The maxi-
mum cable length is either 20 meters or two
meters times the number of devices, whichever is
less. Not observing these limits may cause errat-
ic bus operation.
Return to
INTERLOCK
LO
GUARD
250Vpk
!
105Vpk
DIGITAL I/O
LINE FUSE
SLOWBLOW
1.6A, 250V
LINE RATING
100-240VAC
50, 60Hz
TRIGGER
120VA MAX.
LINK
RS-232
10-3.
Section 10 topics
Remote Operations 10-21
"Interface

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6221

Table of Contents