Keithley 6220 Reference Manual page 354

14-12 SCPI Reference Tables
Table 14-6 (cont.)
Source command summary
Command
:ARBitrary
:DATA <NRf>
[,<NRf>, ...<NRf>]
:DATA?
:APPend <NRf>
[,<NRf>, ...<NRf>]
:POINts?
:COPY <NRf>
:RANGing <name>
:RANGing?
:DURation
:TIME <NRf>
:TIME?
:CYCLes <NRf>
:CYCLes?
:ARM
:INITiate
:ABORt
:EXTRig
[:ENABle] <b>
[:ENABle]?
:ILINe <NRf>
:ILINe?
:IGNore <b>
:IGNore?
:IVALue <NRf>
:IVALue?
* Available with firmware revision A03 and later.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Arbitrary waveforms:
Define arbitrary data points: -1 to +1 (100 points
maximum).
Query the points in the arbitrary waveform.
Append arbitrary data points: -1 to +1 (100
points max. per instance of command).
Query number of points in the waveform.
Copy arbitrary points to NVRAM: 1 to 4.
Select source ranging mode: BEST or FIXed.
Query selected range mode.
Waveform duration:
Set waveform time duration (seconds): 100e-9
to 999999.999 or INFinity.
Query waveform time duration.
Set waveform duration in cycles: 1e-3 to
99999999900 or INFinity.
Query waveform duration in cycles.
Arm waveform function.
Start waveform output.
Abort waveform output.
Waveform external trigger commands: *
Enables/disables mode to externally trigger the
waveform generator: <b> = ON or OFF.
Query if external waveform trigger is enabled.
Specify trigger link input trigger line:
<NRf> = 0 (none) or 1 to 6.
Query trigger link line.
Sets whether or not to restart waveform upon
retriggering: <b> = ON or OFF.
Query retrigger mode.
Sets inactive value to output before/after
waveform: <NRf> = -1 to +1.
Query inactive value.
Return to Section 14 topics
Model 6220/6221 Reference Manual
Default Sec SCPI
7
BEST
INFinity
INFinity
OFF
0
OFF
0.00