Keithley 6220 Reference Manual page 314

11-12 Status Structure
Figure 11-4
Standard event status
Operation event status
The used bits of the operation event register
follows:
•
•
•
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Bit B0, Calibrating (CAL) — Set bit indicates that the Model 622x is
calibrating.
Error/status code: +121
Bit B1, Sweep Done (SwpD) — Set bit indicates that a sweep, Delta,
Differential Conductance, or a pulse sweep for Pulse Delta is finished.
Error/status code: +122
Bit B2, Sweep Aborted (SwpA) — Set bit indicates that a sweep, Delta,
Differential Conductance, or a pulse sweep for Pulse Delta has been
aborted.
Error/status code: +123
Return to
Model 6220/6221 Reference Manual
(Figure 11-5) are described as
Section 11 topics