Keithley 6220 Reference Manual page 351

Model 6220/6221 Reference Manual
Table 14-6 (cont.)
Source command summary
Command
:COUNt <NRf>
:COUNt?
:CABort <b>
:CABort?
:ARM
:ABORt
:LIST
:CURRent <NRf>
[,<NRf>, ...<NRf>]
:APPend <NRf>
[,<NRf>, ...<NRf>]
:POINts?
:CURRent?
:DELay <NRf>
[,<NRf>, ...<NRf>]
:APPend <NRf>
[,<NRf>, ...<NRf>]
:POINts?
:DELay?
:COMPliance <NRf>
[,<NRf>, ...<NRf>]
:APPend <NRf>
[,<NRf>, ...<NRf>]
:POINts?
:COMPliance?
:DELta
:NVPResent?
:HIGH <NRf>
:HIGH?
:LOW <NRf>
:LOW?
:DELay <NRf>
:DELay?
:COUNt <NRf>
:COUNt?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Set sweep count: 1 to 9999 or INFinity
Query sweep count.
Enable to abort sweep on compliance: ON or OFF
Query compliance sweep abort state.
Arm the sweep.
Abort sweep, Delta, Pulse Delta, or Differential
Conductance immediately.
Custom sweep operation:
Define list of currents (amps): -105e-3 to 105e-3
Add current points to existing list: -105e-3 to
105e-3.
Query number of current list points.
Query list of current values.
Define list of delay values (secs): 1e-3 to
999999.999.
Add delay values to existing list.
Query number of delay values in list.
Query list of delay values.
Define list of compliance values (volts): 1e-3 to
105.
Add compliance values to existing list: 1e-3 to
105.
Query number of compliance values in list.
Query list of compliance values.
Delta operation:
Query connection to 2182/2182A: 1 = yes, 0 = no.
Set high source value (amps): 0 to 105e-3.
Query high source value.
Set low source value (amps): 0 to -105e-3.
Query low source value.
Set Delta delay (seconds): 1e-3 to 9999.999
Query Delta delay.
Set number of cycles to run: 1 to 65536 or
INFinity.
Query Delta count.
Return to Section 14 topics
SCPI Reference Tables 14-9
Default Sec SCPI
1
OFF
4
1
5
1e3
-1e3
2e-3
INF