Keithley 6220 Reference Manual page 168

5-48 Delta, Pulse Delta, and Differential Conductance
7.
8.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
The previous read command reads the last Pulse Delta reading that was
performed by the Model 2182A. If this command is sent before a new
reading is available, the last Pulse Delta reading will again be returned.
NOTE If a read command is sent when Pulse Delta is
not running, error -221 Settings Conflict will oc-
cur. See
ed with Pulse Delta operation.
NOTE Details on using Model 6221
are provided on
When finished with Pulse Delta, it can be disarmed by sending the following
command:
SOUR:SWE:ABOR
Recall stored Pulse Delta readings – Model 2182A Pulse Delta readings
were sent to the buffer of the Model 6221. Send the following read com-
mand to read the buffer:
TRACe:DATA?
Return to
Model 6220/6221 Reference Manual
Table 5-2 for details on errors associat-
page 5-15.
' Stops Pulse Delta and places the Model 2182A
in the local mode.
'
' Read Pulse Delta readings stored in 6221 buffer.
Section 5 topics
"Read commands"