Figure 1-2 Model 622X Rear Panel - Keithley 6220 Reference Manual

Model 6220/6221 Reference Manual
Figure 1-2
Model 622x rear panel
NOTE
!
1
1 IEEE-488
Connector for IEEE-488 (GPIB) operation. Use a shielded cable, such as the Model 7006,
7007, or 7008.
2 OUTPUT
3-lug female triax connector for current source output. Mates to the supplied triax cable
(237-ALG-2). Will also mate to any triax cable terminated with a 3-slot male triax connector.
3 ETHERNET (6221 only)
RJ45 female connector for Ethernet operation. Use an RJ45 male/male cable for connec-
tion. Two status LEDs are located at the top of the connector. These LEDs indicate status
of the Ethernet (see
4 DIGITAL I/O
Male DB-9 connector. Four pins for digital output, one pin for Start of Test (SOT) trigger,
and one for external voltage (VEXT) input.
5 RS-232
Female DB-9 connector:
•
•
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
2 3 4 5
Section 10
For RS-232 operation, use a straight-through (not null modem) DB-9 shielded cable
for connection to the PC.
For Delta, Pulse Delta, and Differential Conductance, use the supplied serial cable
(CA-351) for connections between the Model 622x and the Model 2182/2182A
Return to
!
6 7 8
for details).
Section 1 topics
Getting Started 1-11
9
.