Introduction - Keithley 6220 Reference Manual

D-2 IEEE-488 and SCPI Conformance Information

Introduction

The IEEE-488.2 standard requires specific information about how the Model 622x
implements the standard. Paragraph 4.9 of the IEEE-488.2 standard (Standard
488.2-1987) lists the documentation requirements.
of the requirements and provides the information or references the manual for that
information.
Table D-2
The Model 622x complies with SCPI version 1996.0. The tables in
the SCPI confirmed commands and the non-SCPI commands implemented by the
Model 622x.
Table D-1
IEEE-488 documentation requirements
Requirements
(1) IEEE-488 Interface Function Codes.
(2) Behavior of 622x when the address is set out-
side the range 0-30.
(3) Behavior of 622x when valid address is entered. Address changes and bus resets.
(4) Power-On Setup Conditions.
(5) Message Exchange Options:
(a) Input buffer size.
(b) Queries that return more than one response
message unit.
(c) Queries that generate a response when
parsed.
(d) Queries that generate a response when read.
(e) Coupled commands.
(6) Functional elements required for SCPI com-
mands.
(7) Buffer size limitations for block data.
(8) Syntax restrictions.
(9) Response syntax for every query command.
(10) Device-to-device message transfer that does
not follow rules of the standard.
(11) Block data response size.
(12) Common Commands implemented by 622x.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
lists the coupled command used by the Model 622x.
Return to Appendix topics
Model 6220/6221 Reference Manual
Table D-1
Description or Reference
See Appendix C.
Cannot enter an invalid address.
Determine by :SYST:POS
2048 bytes.
None.
All queries (Common Commands and SCPI).
None.
See Table D-2
Contained in SCPI command subsystems
tables (see Section 14).
Block display message buffer size is 40
characters max (top line display is 20
characters, bottom line is 32 characters.
See Programming Syntax in
See Programming Syntax in
None.
See Display Subsystem in
See Common Commands in
provides a summary
Section 14 list
(Section 14).
Section 10.
Section 10.
Section 13.
Section 12.