Keithley 6220 Reference Manual page 357

Model 6220/6221 Reference Manual
Table 14-8 (cont.)
System command summary
Command
:KEY?
:KCLick <b>
:KCLick?
:BEEPer
:STATe <b>
:STATe?
:PRES'et
:POSetup <name>
:POSetup?
:ERRor?
:CLEar
:TSTamp
:RESet
:RNUMber
:RESet
:VERSion?
:ABOard
:SNUMber?
:REVision?
:DBOard
:SNUMber?
:REVision?
:PASSword
:ENABle <b>
:ENABle?
:CDISable <string>
[:CENable] <string>
:STATe?
:NEW <string>
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Query last pressed key.
Enable or disable key-click.
Query state of key-click.
Beeper:
Enable or disable beeper.
Query state of beeper.
Return 622x to PRESET default setup.
Select power-on setup: RST, PRESet, SAV0,
SAV1, SAV2, SAV3, or SAV4.
Query power-on setup.
Query the latest error code and message.
Clears error code and message from Error
Queue.
System timestamp:
Reset timestamp to zero seconds.
System reading number:
Reset reading number to zero.
Query revision level of SCPI standard.
Analog board:
Query serial number of analog board.
Query revision level of analog board.
Digital board:
Query serial number of digital board.
Query revision level of digital board.
Password:
Enable or disable the use of password.
Query state of password usage.
Disables protected commands.
<string> = "password".
Enables protected commands.
<string> = "password".
Query state of password: Returns "0" if
password protected commands are disabled.
Returns "1" if enabled.
Set new password.
<string> = "password".
Return to Section 14 topics
SCPI Reference Tables 14-15
Default Sec SCPI
ON 1
ON 1
1
1
11
11
13
13
1
1
10