Scpi Reference Tables; General Notes - Keithley 6220 Reference Manual

14-2

SCPI Reference Tables

General notes

•
•
•
•
•
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Brackets ([ ]) are used to denote optional character sets. These optional
characters do not have to be included in the program message. Do not use
brackets in the program message.
Angle brackets (< >) are used to indicate parameter type. Do not use angle
brackets in the program message.
The Boolean parameter (<b>) is used to enable or disable an instrument oper-
ation. 1 or ON enables the operation and 0 or OFF disables the operation.
Uppercase characters indicated the short-form version for each command
word.
Table Headings:
• Command and Description — Lists and briefly explains each
unabridged SCPI command word and its parameters.
• Default — Listed parameters are both the *RST and SYSTem:PRESet
defaults, unless noted otherwise. Parameter notes are located at the
end of each table.
• Sec— Refers you to the section (Sec) that provides operation informa-
tion for that command or command subsystem.
• SCPI — A checkmark (√) indicates that the command and its parame-
ters are SCPI confirmed. An unmarked command indicates that it is a
SCPI command, but does not conform to the SCPI standard set of
commands. It is not a recognized command by the SCPI consortium.
SCPI confirmed commands that use one or more non-SCPI parame-
ters are explained by notes.
Return to
Model 6220/6221 Reference Manual
Section 14 topics