Connect The Controlling And Expansion Chassis - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
3 - 32
2.5.4.4

Connect the Controlling and Expansion Chassis

.
Expansion Chassis Interface Unit
for the Expansion Chassis
PZ-BS11
Expansion Chassis Interface Unit
for the Controlling Chassis
PZ-BS10
Figure 3-41 19" Expansion Chassis Interface Units
1.
2.
Installment of the PZ-BS10 blade and PZ-BS11 blade(s) must be
completed prior to installation of the provided (Cat 5) expansion
cabling.
Ensure Controlling and Expansion chassis are
powered down.
Using the NEC provided CAT5 straight-through
cable(s), attach one end to each Expansion Chassis
CN2 connector on the PZ-BS11 blade (see
3-42 System Expansion Cabling on page
Attach the opposite end to the CN2, CN3 or CN4
connector on the PZ-BS10 of the Controlling
Chassis.
UNIVERGE SV8100
Figure
3-33.
Installing the SV8100 Chassis