Electra Elite Ipk Terminals And Equipment - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
5.5.4

Electra Elite IPK Terminals and Equipment

The voltage, current, and ring signal for the Electra Elite IPK Multiline
Terminals, Single Line Telephone equipment, and AP(A)-R/AP(R)-R
Units are listed below:
Multiline Terminal
Voltage: -11 ~ -26 Vdc
Maximum Current: 250 mA
Acoustical characteristics meet Electronic Industry
Association (EIA) standard proposal SP-1286 and
standard EIA RS-470.
Single Line Telephone
Standard 2500 Set: 500 type network
Nominal Current: 25 mA
Ring Signal: 56 Vac RMS @ 20 Hz
SLTII(1)-U( ) ADP
Standard 2500 Set: 500 type network
Nominal Current: 30 mA
Ring Signal: 56 Vac RMS @ 20 Hz
AP(A)-R Unit
Standard 2500 Set: 500 type network
Nominal Current: 30 mA
AP(R)-R Unit
Standard 2500 Set: 500 type network
Nominal Current: 30 mA
Ring Signal: 56 Vac RMS @ 20 Hz
Issue 1.0
2 - 23