NEC Univerge SV8100 System Hardware Manual page 353

UNIVERGE SV8100
System Hardware Manual
Knockout
Figure 6-31 Bottom Option Interface Knockout
7. Using the exposed Bottom Option Interface as a guide, install
the APR-L UNIT in the bottom of the DTL/ITL multiline terminal.
Push down until left and right tabs are seated (Refer to
6-32 Install APR-L
Tab
Bottom Option
Interface
8. Return tilt leg to original position.
9. For the APR adapter to be recognized correctly, before
plugging in the keyset, make sure the extension number to be
used for the adapter is undefined in Program 10-03-01.
10. Plug the line cord back into the keyset.
11. Using the ferrite bead that was included with the APR Adapter,
wrap the line cord once through the ferrite bead and snap it
shut (refer to Figure 6-33 Ferrite Bead with APR Adapter on
page 6-42).
UNIT).
Figure 6-32 Install APR-L UNIT
Issue 1.0
Bottom Option
Interface
Figure
Tab
6 - 41