Cd-4Odta (4-Port Tie Line Interface Blade); Description - NEC Univerge SV8100 System Hardware Manual
Full-featured ip based communications system
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 1.0
5.7
4 - 86
CD-4ODTA (4-Port Tie Line Interface Blade)
Figure 4-30 CD-4ODTA Blade
5.7.1
Description
The CD-4ODTA Tie Line blade is an out band dial type analog tie line
interface blade. This blade supports system connections to either 2-
wire (four lead, tip/ring) or 4-wire (eight lead, tip/ring/tip 1/ring 1)
E&M signalling tie lines (determined in Program 10-13 ). System
programming is also used to select the connection types with Type 1
or Type V. The CD-4ODTA consumes 4 ports ranging between ports
001~200. Each blade requires one universal slot and provides:
Four analog 4-circuit tie line interfaces
UNIVERGE SV8100
Installing the SV8100 Blades
Advertisement
Table of Contents
