Panel( )-L Unit; Wm-L Unit Attached To Wall - NEC Univerge SV8100 System Hardware Manual
Full-featured ip based communications system
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 1.0
5 - 64
5.2.6
PANEL( )-L UNIT
Optional plastic color side panels that allow users to customize the
ITL/DTL terminals. The following colors are available for the Base
(all), VLCD (Value LCD) and SLCD (Sophi LCD) terminals:
Silver (original)
Red
Blue
Clear
Wood Grain
Environmental
Right and Left side panels are not interchangeable.
.
5.2.7
WM-L UNIT Attached to Wall
The WM-L UNIT (Wall Mount Unit) is used to attach any DT300/
DT700 Series multiline terminal to the wall. This unit connects to the
back side of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall using the WM-L UNIT.
1.
Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest.
2.
Feed the line cord through the opening in the WM-L UNIT.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-75 LCD (BL)-L UNIT
Figure 5-76 PANEL( )-L UNIT
UNIVERGE SV8100
Advertisement
Table of Contents
