Installation - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4 - 56
Eight Digital Station ports
Two analog extension ports
Two status LEDs
Table 4-28 CD-LTA Maximum Upgrade Capacities
maximum capacities for the CD-LTA blades when they are upgraded.
4.5.2

Installation

Install the CD-LTA blade into any available universal slot.
Table 4-28 CD-LTA Maximum Upgrade Capacities
CCPU
Without PZ-ME50
With PZ-ME50
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIDB PCB must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
UNIVERGE SV8100
provides the
CD-LTA
Only one supported
Maximum of four per system
One per chassis
Installing the SV8100 Blades