Remove And Replace Handset Battery - NEC Univerge SV8100 System Hardware Manual
Full-featured ip based communications system
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 1.0
5 - 86
7.4.3
Remove and Replace Handset Battery
The battery loaded in the Bluetooth handset has a useful life of about
two years, depending on how the handset is used. If the battery
voltage diminishes quickly after the battery has been charged for a
long time, replace with a new Li-ion battery.
1.
Remove cover from back of handset.
2.
Remove existing battery and dispose of properly.
3.
Install new Li-ion battery.
Full charge takes approximately 16 hours.
.
4.
Reinstall battery cover.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-108 Removing Battery Cover from Handset
Figure 5-109 Removing Battery from Handset
UNIVERGE SV8100
Advertisement
Table of Contents
