Battery Connection; Installing The Internal Batteries; Section 3 Battery Connection - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
B
S 3
ATTERY
ECTION
There are two types of battery connection to provide battery life in the event of a
power failure, the internal battery and an external battery with CHS LARGE BATT
BOX.
3.1
System Hardware Manual
C
ONNECTION

Installing the Internal Batteries

An internal battery source using two batteries can be installed using the
CHS2U BATT MTG KIT (mounting kit) and CHS2U BATT CABLE INT (internal
cabling).
CHS2U BATT MTG KIT (Backup time = 10 Minutes/24 Terminals)
1. Ensure the chassis is powered down.
Ensure the CHS2U chassis is powered OFF.
2. Disconnect AC power and grounding cable from rear of chassis.
3. Remove screws from battery access panel on rear of chassis. Refer to
Figure 3-47 Removing Battery Access
Figure 3-47 Removing Battery Access Panel
Panel.
Issue 1.0
3 - 37