Installing The Dcl-60-1 Console - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
Keep the following in mind when installing DSS Consoles:
A 60-Button DSS Console requires a separate digital station port
when pairing with a digital keyset. For IP terminals, the console is
connected to the side option slot using a special cable.
5.2.4.1

Installing the DCL-60-1 CONSOLE

1. Remove both plastic panels from the front of the
multiline terminal.
2. Turn multiline terminal upside down.
.
Figure 5-67 DCL-60-1 CONSOLE
To prevent possible damage to the DCL-
60-1 CONSOLE or the DTL/ITL
multiline terminal during installation or
removal, disconnect the line cord/LAN
cable and the AC/DC adapter from the
DTL/ITL multiline terminal.
Only one DCL-60-1 CONSOLE can be attached to the
DTL/ITL multiline terminal at a time.
Issue 1.0
5 - 59