NEC Univerge SV8100 System Hardware Manual page 23

UNIVERGE SV8100
System Hardware Manual
MF senders / receivers
10/100 Ethernet Port
2 Control Relays
MOH Input Port
Paging Output Port
In-Mail (VMDB)
VoIP.
In addition, by means of advanced LSI technology, size of the CPU blade is
minimized, O&M NIC port (10/100M) is built in and VoIPDB which has VoIP NIC
port (Gigabit Ethernet) is mountable without additional slots in the chassis. The
O&M NIC port is linked with LAN/WAN for inter-work with PCPro, SMDR, OAI
server, and the VoIP NIC port is linked with LAN/WAN for control signaling and
voice signaling (RTP) for DT700 series, etc.
High Density Legacy Line/Trunk Blades
Major legacy line/trunk blades used in SV8100 are provided with main blade +
daughter blade architecture. When the main blade is mounted only in an initial
supply, line/trunk interfaces can be easily expanded by adding the daughter
blade. The maximum number of ports for the line/trunk blades is 8/16 ports with
daughter blade, respectively. This allows the physical system size to be
compact.
Universal Blade Slot (19" Chassis)
A 19" Chassis is used for legacy line/trunk blades. One 19" Chassis provides six
universal slots and one expansion slot. Also, the universal slots can be used for
special application blades without complicated limitation. This makes easy
quotation and installation.
Easy Installation (Front Cabling and Enhanced O&M Tool)
Cable connectors (RJ-45 or RJ-61) are located on the front panel of each
chassis and blade. It increases efficiency of the cabling work. Also, PCPro
provides an enhanced user interface. A Quick Setup tool provides easy setup
(system data programming) for a basic system configuration in shorter time.
Issue 1.0
1 - 3