Installation; Led Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
System Hardware Manual
5.1.2

Installation

Install the COIU blade into an available slot in the chassis. (Refer to
Figure 4-22 CD-4COTA Blade on page 4-59
blade.)
If the PZ-4COTE is to be used, install this prior to inserting the CD-4COTA
.
blade into the chassis.
5.1.3

LED Indications

LED indications for the CD-4COTA are listed in
CD-4COTA LED
function and LED and Operational status. Refer to
CD-4COTA Blade on page 4-59
blades.
Table 4-32 CD-4COTA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Issue 1.0
for a layout of the
Table 4-32
Figure 4-22
Remarks
4 - 61