NEC Univerge SV8100 System Hardware Manual page 133

UNIVERGE SV8100
System Hardware Manual
MF Signal Sender (Sends caller information to CO for E911)
Call Progress Tone Detection
C-Channel Control
Conference: 64 Channels
Caller ID Receiver; 32 Channels
Caller ID Generator; 4 or 10 Channels for Analog Stations
This can be expanded up to 20 by disabling 32 channels of the
Conference circuits and disabling the MFC Tone Sender
A load switch which is used for initial system startup, resetting the
system, or when upgrading system software
One Serial Port (null modem/cross-over cable required)
One USB Port – USB 1.1/2.0 (requires USB driver – download from
NEC web site)
One Gbit Ethernet Port for VoIP function
One CompactFlash Card Slot
Background Music/EXSP Control Port
Status LED
BGM LED
EXSP Control LED
Two Audio Input/Output Terminals
One General Purpose Control Terminal
One Music On Hold External Source
HDLC Packet Processing
Real Time Clock (tolerance 30 seconds/month)
Internal MOH Generation (supplied from Melody IC)
Call Control Server (ex: Conference Bridge Server, Voice Mail Server,
SIP Server, RTP Forwarding, VoCoder Conversion)
One lithium battery (Sony CR2032 or equivalent) which provides
battery back-up of system data and RAM memory for approximately 30
months.
The CD-CP00 functions provided are:
Call Control Server
Conference Bridge Server
Voice Mail Server (voice mail requires a compact flash card)
SIP Server
Issue 1.0
4 - 17