NEC Univerge SV8100 System Hardware Manual page 306
Full-featured ip based communications system
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 1.0
5 - 88
5.
Insert the lower claws of the Bottom Unit (see
Installing the BHA-L
terminal.
6.
Align connector on inside of BHA-L UNIT and push down until
unit snaps into place.
7.
Set tilt legs to desired position.
8.
Return the multiline terminal to the numbered keypad in the up
position.
9.
Connect the Line cord and the AC adapter.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-111 Removing the Connector Cover
UNIT) into precut holes on the multiline
Figure 5-112 Installing the BHA-L UNIT
UNIVERGE SV8100
Figure 5-112
Advertisement
Table of Contents
