Removing The Multiline Terminal From The Wall Mounted Plate - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
6.
7.
5.2.10

Removing the Multiline Terminal from the Wall Mounted Plate.

To remove the Multiline Terminal, push up on the telephone until it
comes loose.
Align the two holes on the back of the WM-L UNIT
with the two screws on the wall plate and slide
downward (refer to
Terminal Wall on Wall
Figure 5-84 Mount Multiline Terminal Wall on Wall Plate
Because of strength variation in switch boxes, this
.
method is not recommended.
Push excess line cord behind the Multiline Terminal.
Figure 5-85 Removing the Multiline Terminal
Figure 5-84 Mount Multiline
Plate).
Issue 1.0
5 - 69